Liquid-O-Ring 101EU Film Forming Lubricant is a premium quality highly concentrated lubricant that resists the corrosive effects of downhole chemicals. Liquid-O-Ring 101EU is made with LIQUILON, which enhances the lubricity and extreme pressure properties. LIQUILON is unaffected by acids, caustics, downhole chemicals, and hydrocarbons including gasoline and solvents.
Liquid-O-Ring 101EU is inert and thermally stable. The film forming properties of Liquid-O-Ring 101EU eliminates wear, guards against rust and corrosion, and prevents metal-to-metal contact thereby significantly reducing operating temperature. In many cases, the power (electricity) to operate is reduced. Liquid-O-Ring 101EU provides instant lubrication to equipment critical areas during start up.
BENEFITS
🟥 REACH compliant
🟥 Made with LIQUILON
🟥 Highly concentrated
🟥 Eliminates wear
🟥 Guards against rust and corrosion
🟥 Prevents metal-to-metal contact
🟥 Provides residual lubrication
🟥 Seals wireline tools from the effects of downhole chemicals
🟥 Ensures against galling and seizing during makeup of wireline tools
🟥 Provides instant lubrication during start up
🟥 Service temperatures 10°F to >400°F
APPLICATION
Liquid-O-Ring 101EU is recommended for use on O-rings, seal nipples, gaskets, packer plugs, and other downhole tool accessories to ensure against drying, cracking, and downhole contamination.
Liquid-O-Ring 101EU is also recommended for application to wireline equipment and various downhole tools, where lubrication and corrosion resistance are vital. This lubricant will allow easy break-out and disassembly of downhole tools that have been subjected to adverse downhole chemicals.
TYPICAL OBSERVATIONS
Type: Concentrated Film Forming Lubricant
Color: Green*
Texture Smooth: Paste
Consistency: Buttery
Active Component: LIQUILON
Thickener: Bentone
Density, lb/gal @ 77°F (25°C): 7.65-8.15
Specific Gravity, @ 77°F (25°C): 0.916-0.976
Dropping Point, ASTM D-2265: 450°F (232°C)
Flash Point, ASTM D-92: >450°F (>232°C)
Penetration, ASTM D-217 Worked @ 77ºF (25°C): 265–295
Base Oil Viscosity:
174.0 cSt, 40°C
17.0 cSt, 100°C
Corrosion Preventive Properties, ASTM D-1743 @ 125°F (51°C): Pass
Water Washout Characteristics, ASTM D-1264 @ 100°F (37°C): 1.0%
Evaporation Loss, ASTM D-972 @ 210°F (98°C): 2.8%
Oil Separation, ASTM D-1742 @ 77°F (25°C): Nil
Oxidation Stability, ASTM D-942 @ 210°F (98°C) 72 Hrs. PSI Loss: 6
Shelf Life (unopened container): Two years