- high light cutting
Some parts of the aluminum alloy surface are cut with a fine engraving machine, so that these cutting surfaces show a highlighted area. This processing process is generally used in mobile phones, high-end TV more, especially those high-end TV is the use of this process, so that the appearance of the TV becomes more fashionable, but also shows the sharp sense of technology. - Sand blasting
This process uses the impact of high-speed sand flow to clean and roughen the aluminum alloy surface, so that the aluminum alloy surface can obtain a certain degree of cleanliness and different degrees of roughness. After the sandblasting process of aluminum alloy, its mechanical properties can be improved, thereby improving the fatigue resistance of aluminum alloy products, but also increase the adhesion and durability of aluminum alloy products and surface coatings. - Wire drawing
This process refers to the repeated grinding of the surface of the aluminum alloy with sandpaper until the line is scraped out. There are many kinds of wire drawing, such as: straight, random, thread, spiral and so on. After the drawing process of aluminum alloy, its surface can be very clear to see each line, and the metal matte of aluminum alloy products will show a fine hair luster, so that aluminum alloy products become more fashionable and scientific and technological sense. - Polishing
This process refers to the use of mechanical methods or chemical methods or electrochemical methods to polish the surface of aluminum alloy products, so as to reduce the surface roughness of aluminum alloy products, so that the surface of aluminum alloy products become more smooth and bright. After polishing the aluminum alloy products, its surface effect is close to the mirror effect of stainless steel, which can give people a very high-end and fashionable visual effect. (2024-02-21)
