636G Self-Mold Stick Packing is a clean, odorless, pliable packing used to seal stuffing boxes. Made with LIQUILON\u00ae, 636G Self Mold continues to seal and lubricate long after conventional packing has failed. It repairs scored and pitted shafts and reduces wear. Regardless of the size of the stuffing box, 636G Self-Moldforms itself to the configuration of the box and shaft and compensates for wear by remolding itself. 636G Self-Mold is highly recommended for locations where equipment shut down causes
\ncritical conditions.636G Self-Mold can be used as a supplement to worn conventional packing or intervals with conventional packing. 636G Self-Mold serves temperatures from 0\u00b0 to >400\u00b0F(>204\u00b0C) and pressures to 10,000 psi. 636G Self-Mold\u00ae* is unaffected by acids, oils, caustics, or common solvents.
\n636G Self-Mold can be applied with shaft surface speeds up to 1000 fpm (ft. per min.). Installation is
\nsimple. Apply 636G Self-Mold in whole stick form or break in small pieces if the stuffing box is small.
\nIt may be applied to stuffing boxes with or without lantern rings, as well as to stuffing boxes with high fluid pressure or excessive tolerances.
\nBENEFITS:
\n\u25aa Moldable
\n\u25aa Repairs scored and pitted shafts
\n\u25aa Simple to apply
\n\u25aa Services extreme temperatures and pressures
\n\u25aa Low coefficient of friction
\n\u25aa Reduces packing cost as a supplement
\n\u25aa Size: \u00bd\u201d equilateral x 2 \u00bd\u201d sticks
\nTYPICAL OBSERVATIONS:
\nForm Moldable sticks
\nShape Triangular prisms
\nSize \u00bd\u201d x \u00bd\u201d x \u00bd\u201d x 2\u00bd\u201d
\nEquilateral
\nColor:Green*
\nOdor:None
\nActive Component:LIQUILON
\nManufacturing Process:Fluoromation
\nStick Density, lb\/gal @ 77\u00b0F:13.6
\nSpecific Gravity @ 77\u00b0F:1.629
\nWater-Repellent:Yes
\nWater-Resistant:Yes
\nService Temperature:Up to >400\u00b0F (>204\u00b0C)
\nService Pressure:Up to 10,000 psi
\nSolubility in Water:Insoluble
\nHardness (Durometer):60\u201370
\nShelf Life (unopened container):Four years<\/p>\n","protected":false},"excerpt":{"rendered":"
636G Self-Mold Stick Packing is a clean, odorless, pliable packing used to seal stuffing boxes. Made with LIQUILON\u00ae, 636G Self Mold continues to seal and lubricate long after conventional packing has failed. It repairs scored and pitted shafts and reduces wear. Regardless of the size of the stuffing box, 636G Self-Moldforms itself to the configuration …<\/p>\n