Liquid-O-Ring ZN50 Tool Joint Compound is manufactured with the finest powdered metallic zinc and a high temperature, extreme pressure, petroleum base composition. The zinc used in the manufacture of Liquid-O-Ring ZN50 meets API and IADC requirements. Liquid-O-Ring ZN50 reduces plating and buildup of zinc, a problem encountered with other zinc products. This product conforms to the recommendation of \u201cTool Pushers Manual\u201d (IADC-International Association of Drilling Contractors), Section B-2, Pages 1 and 2, and API (American Petroleum Institute) RP 5A3\/ISO 13678. Liquid-O-Ring ZN50 contains less than 0.3% sulfur as recommended by tool joint manufacturers.Liquid-O-Ring ZN50 has good brushability over a wide range of temperatures, is resistant to water washout, has good adhesion to surfaces, and prevents against rust and corrosion.
\nBENEFITS:
\n\u25aa No plating or zinc buildup
\n\u25aa Prevents rust and corrosion
\n\u25aa Resists washout
\n\u25aa Water-repellent
\n\u25aa Sticks to wet surfaces
\n\u25aa Friction factor of 1.0
\n\u25aa Brushable over a wide temperature range
\n\u25aa Low sulphur content
\n\u25aa Meets API and IADC requirements
\nTYPICAL OBSERVATIONS:
\nColor:Gray
\nTexture:Smooth
\nSoap Type:Lithium Base
\nDensity, lb\/gal @ 77\u00b0F (25\u00b0C):14.90
\nSpecific Gravity @ 77\u00b0F (25\u00b0C):1.785
\nDropping Point, ASTM D-2265:395\u00b0F (185\u00b0C)
\nFlash Point, ASTM D-92:350\u00b0F(177\u00b0C)
\nPenetration,ASTM D-217 worked @ 77\u00b0F (25\u00b0C):275\u2013305
\nBase Oil Viscosity: cSt @ 40\u00b0C 370 cSt @ 100\u00b0C 21
\nEvaporation Loss,ASTM D-972 @ 212\u00b0F (100\u00b0C):0.4%
\nShell 4-Ball, ASTM D-2596 Weld Point, kgf:620
\nOil Separation, ASTM D-1742 @ 77\u00b0F (25\u00b0C):0.6%
\nCopper Strip Corrosion, ASTM D-4048:1A
\nTemperature Range:0\u00b0F to 375\u00b0F (-17\u00b0C to 190\u00b0C)
\nFriction Factor, API RP 5A3 Annex I:1.0
\nShelf Life (unopened container):Four years<\/p>\n","protected":false},"excerpt":{"rendered":"
Liquid-O-Ring ZN50 Tool Joint Compound is manufactured with the finest powdered metallic zinc and a high temperature, extreme pressure, petroleum base composition. The zinc used in the manufacture of Liquid-O-Ring ZN50 meets API and IADC requirements. Liquid-O-Ring ZN50 reduces plating and buildup of zinc, a problem encountered with other zinc products. This product conforms to …<\/p>\n